..:: TekMetal.net ::..


AP06



	The cutting pad type AP06 grey is made of high-grade thermoplastic polypropylene material. Our raw material is a homopolymer used especially for the production of cutting pads. Our special plastic concept employed here results in the very high abrasion resistance of the cutting pads. Shore factor: D 76 ± 2 Intended use: sandwich board for roller cutting machines for shoes and foam material Surface standard: smooth on both sides (± 2mm) upon request: planed or roughened on one side (for glueing) Dimensions: Basically all sizes up to a maximum size of 4900 x 2450mm with thicknesses of 10-100mm. Other dimensions and thicknesses upon request.
	Areas of application: * automobile industry * gastronomy * footwear industry * leather industry * production of gloves * textile industry * production of paper and cardboard articles * cork


AP45
	The cutting pad type AP45 permanent green is made of high-grade thermoplastic polypropylene material. Our raw material is a homopolymer used especially for the production of cutting pads. Our special plastic concept employed here results in the very high abrasion resistance of the cutting pads. Shore factor: D 69 ± 2 Density: 0,91 Intended use: for cutting shoes and leather Surface standard: smooth on both sides (± 2 mm) upon request: planed or roughened on one side (for glueing) Dimensions: Basically all sizes up to the size of 4900 x 2450 mm with thicknesses of 10 -100 mm. Other dimensions and thicknesses upon request
	Areas of application: * footwear industry * leather industry * production of gloves * textile industry * production of paper and cardboard articles * cork processing * automobile industry * gastronomy


AP01
	The cutting pad type AP 01 natural is made of high-grade thermoplastic polypropylene material. Our raw material is a homopolymer used especially for the production of cutting pads with high abrasion resistance. Shore factor: D 73 ± 2 Density: 0,91 Intended use: universal cutting pad Surface standard: smooth on both sides ( ± 2 mm) upon request: planed or roughened on one side (for glueing) Dimensions:Basically all sizes up to a maximum size of 4900 x 2450 mm with thicknesses of 10 - 100 mm. Other dimensions and thicknesses upon request.
	Areas of application: * footwear industry * leather industry * production of gloves * textile industry * production of paper and cardboard articles * cork processing * automobile industry * gastronomy




AP02
	The cutting pad, type AP 02 nylon, is made of a cast polyamide, a highly molecular, thermoplastic material. Shore factor: D 84 +/-2 Density: 1,15 Intended use: for synthetic material Surface standard: planed - 0/+0.6 up to a width of 1000 mm from a width of 1000 mm nylon boards cannot be planed Dimensions: Basically all sizes up to a maximum size of 2000 x 1200 mm with thicknesses 8 - 100 mm and all sizes within 1000 x 1000 with thicknesses of 110 - 160 mm. Other dimensions and thicknesses upon request.
	Areas of application: * footwear industry * leather industry * production of gloves * textile industry * production of paper and cardboard articles * cork processing * automobile industry * gastronomy


AP03
	The cutting pad type AP03 reddish brown is made of high-grade thermoplastic polypropylene material. Our raw material is a homopolymer used especially for the production of cutting pads. Our special plastic concept employed here results in the very high abrasion resistance of the cutting pads. Shore factor: D 64 +/-2 Density: 0,91 Intended use: for cutting shoes and leather Surface standard: smooth on both sides(+/- 2mm) upon request: planed or roughened on one side (for glueing) Dimensions: Basically all sizes up to the size of 4900 x 2450mm with thickness of 10-100mm. Other dimensions and thicknesses upon request.
	Areas of application: * footwear industry * leather industry * production of gloves * textile industry * production of paper and cardboard articles * cork processing * automobile industry * gastronomy

AP07
	The cutting pad type AP 07 multicolour is a recycled product made of high-grade thermoplastic material in different colours and therefore very reasonable in price. Shore factor: D 68 +/-2 Intended use: multi-purpose board Surface standard: smooth on both sides (+/- 2 mm) Dimensions: Basically all sizes up to a maximum size of 4900 x 2450 mm with thicknesses of 10-100 mm. Other dimensions and thicknesses upon request.
	Areas of application: * footwear industry * leather industry * production of gloves * textile industry * production of paper and cardboard articles * cork processing * automobile industry * gastronomy

back